Why the automatic soap dispenser does not discharge liquid

source:Industry news release time:2022-05-16 Hits: Popular:aromatherapy diffuser direct sales

　　When we use the soap dispenser, we sometimes encounter the situation that the soap dispenser does not discharge liquid, which is often caused by the following five reasons.

　　1. Insufficient hand sanitizer. In this case, we only need to add hand sanitizer.

　　2. Hand sanitizer is thick. If the hand sanitizer is too thick, it will not flow smoothly or block the outlet. At this time, you can inject an appropriate amount of water into the soap container to dilute the hand sanitizer;

　　3. Bought a poor soap dispenser. There will be some problems when you purchased a poor quality soap dispenser. For example, the filter is not sensitive, there is no reaction when the liquid comes out, and the liquid comes out without filtration, etc. It is recommended to choose formal channels when purchasing, brand should be reliable and the quality must be guaranteed;

　　4. Too much air inside the soap dispenser. The main way for the soap dispenser to give out the hand sanitizer is to press the liquid outlet pipe. If there is too much air in the liquid outlet pipe, it is difficult to press out the hand sanitizer. You can take out the pressing tube outside the soap feeder, and then clean up the excess hand sanitizer outside, inject clean water and press or use the soap dispenser to discharge the air in the outlet tube;

　　5. The spring is old and broken. The spring in the soap dispenser is used to support and press the hand sanitizer. If the liquid outlet spring is aging and broken, it will also lead to the failure of pressing the hand sanitizer. In this case, we just need to change a new one.