How to maintain the ultrasonic humidifier correctly?

　　Ultrasonic humidifier is widely used in industrial production because of its advantages such as high humidification efficiency, small size, convenient operation, etc. During the use of ultrasonic humidifier, all parts and components will lose. If attention is paid to machine maintenance and care during the use, the service life of the humidifier can be effectively extended. How to maintain the ultrasonic humidifier?

　　1. After a long time of use, the atomizing plate will form scale condensation on the surface of the atomizing plate, which will cause the atomizing plate and little or no fog, especially the poor water quality. Therefore, the atomizing plate should be cleaned regularly. Generally, the atomizing plate, atomizing plate and water tank should be cleaned once every 7-10 days;

　　2. The normal atomizing plate has a certain service life. After exceeding the service life, the atomizing plate is easy to break, which will cause no fog. If it is not replaced in time, the fuse will break and the circuit board and atomizing plate will be damaged. Therefore, the atomizing plate or atomizing plate needs to be replaced in time after the atomizing plate breaks;

　　3. Pay attention to keep the waterproof fan clean, because if there are sundries in the fan, it will hinder the fan operation and easily damage the fan;

　　4. Put the equipment in a dry and clean environment to prevent damage to small fans and transformers in the machine due to excessive humidity;

　　5. If the equipment has not been started for a long time, open the door of the power distribution cabinet before starting to check whether the lines or accessories fall off, so as to avoid machine failure.

Read recommendations:

A4 Aroma Diffuser

F22 Cooling Fan

Air purifier filter technology introduction.Air purifier wholesale

Car Air purifier

aroma diffuser Processing