Selection of Humidifier in Printing Workshop.usb humidifier Manufacturing

　　The nozzle of the humidifier in the printing workshop will not be blocked after long-term use. The humidifier has a set of automatic humidity control system, which can test and display humidity 24 hours without interruption, and automatically control the humidifier to keep the humidity in the surrounding space constant. The amount of spray per hour can reach 800 kg water at most; One humidifier can cover 100~10000m2 of space, which is an ideal choice for printing enterprises. When purchasing the humidifier in the printing workshop, in addition to paying attention to the humidification amount of the product, the following points are very important:

　　● The quality of imported piston pumps and imported German or Italian piston pumps differs greatly from that of domestic piston pumps.

　　● The quality and effect of imported sprinklers, domestic sprinklers and Taiwan imported sprinklers are far from each other. Note that the laser logo on the sprinklers is not necessarily an imported product. The check valve spring of imported sprinklers is 304 or

　　It is made of 316 stainless steel. The rotating rotor can be easily taken out for cleaning. The sealing rubber ball will not shed particles and block the nozzle for a long time. The 0.15 mm orifice is drilled by a drill and grinded The imported nozzle is equipped with filter element

　　● For red copper pipes, the rubber pipes with particles falling off when the pressure of 0kg/cm2 at shutdown and 70kg/cm2 at operation alternates cannot be used. The thickness of PE pipe wall is uneven, the maximum pressure is 100 kg/cm2, and it cannot be used even if it is afraid of ultraviolet radiation.

Read recommendations:

A17 Aroma Diffuser

F19 Cooling Fan

Hotel Fragrance Matters!

desk fan Factory

desk fan Manufacturing