Transformation and application of high-pressure micro-mist humidifier in central air-conditioning in printing workshop.water humidifier wholesale

　　First, remove the original wet film humidifier, bottom water tank, water circulation pipeline, water pump, and corresponding control electric box. Because the humidification function section of the central air-conditioning unit has only one small maintenance entrance and exit, the old wet film humidifier cannot be moved out as a whole, so it can only be disassembled inside the central air-conditioning unit, but because many bolt fasteners and pipe joints are corroded , so the wet film humidifier is cleaned out by cutting and separating.

　　Then, use the space vacated inside the central air conditioner to install and fix two high-pressure micro-mist humidification copper pipes and nozzles on the top plate of the central air conditioner, lead the copper pipes to the host on the side, and make the copper pipes pass through the side wall of the air conditioner. seal.

　　Finally, a set of tap water filter and softened water treatment device are installed outside the central air conditioner to provide pure water source for the high-pressure micro-mist humidifier to prevent the nozzle from clogging and scaling over time, and to ensure the quality of the micro-mist.

　　After the transformation, the humidity of the high-pressure micro-mist humidifier is small, and the relative humidity control accuracy is high, which can meet the quality control needs of printing enterprises.

Read recommendations:

K5 Air Purifier

F22 Cooling Fan

What is the significance of using a diffuser?

F10 neck fan Cooling Fan

air humidifier manufacture