Ultrasonic humidifier to prevent industrial static electricity and bathing environment phenomena.ultrasonic humidifier big

　　1. When the ultrasonic humidification is not used for a long time, remove the power plug and wipe the water tank clean.

　　Ultrasonic humidifier to prevent industrial electrostatic and dry bath environment -20-08-13-02

　　2. When the annex of the ultrasonic humidifier is dirty, wipe the surface of the surface.

　　3. During the operation of the humidifier, hot air discharged from the air outlet is the phenomenon of the normal operation of the machine. The humidity in winter is low, and the temperature of the outlet is significantly reduced. It is a normal phenomenon.

　　Ultrasonic humidifier to prevent industrial electrostatic and dry bath environment -20-08-13-02

　　4. Moisturizing is the measurement of the humidifier of the humidifier at 30/kg under the standard environment conditions, which refers to the outlet volume measured at 24 hours in an environment of 30 ° C/RH80%.

　　If your product is dry, it should be humidified. Some products require a very low and humid environment, and the adsorption humidifier needs to be used.

　　5. The temperature of the dry air is lower than the surface temperature of the tray pipe, and it will not produce frost. For cold storage, frost will worsen its performance. Wetness can keep you away from the trouble of frost.

　　6. The humidifier should be avoided by the heat source. Keeping the inlet and out of the air outlet. Generally, the humidifier should be placed in the middle of the space. There should be enough space around. Do not stack items. Keeping the air smoothly, it can achieve the effect of dehumidification even.

Read recommendations:

A8 Flame Aroma Diffuser

A3 aroma diffuser.essential diffuser

Use an air purifier to prevent danger!air purifier covid wholesale

aroma diffuser Processing

desk fan direct sales