Workshop Humidity Control Printing Spray Humidifier Solutions

　　Workshop humidity control printing spray humidifier solution? In many industrial plants, in order to improve the work efficiency of workers and the quality of products, the relative humidity of the workshop air will be strictly required. Although some people use watering, mopping and other methods to increase the humidity, but, The industrial humidifier is the most used spray humidification, which has good effect, can be controlled remotely, saves manpower, and has a wide range of applicability. It is used in various workshops, especially for the humidity control solution in the printing workshop.

　　The relative humidity of the air in the printing workshop can generally be controlled between 50-60RH% through a printing spray humidifier to ensure the water content of the paper and avoid paper deformation and printing errors.

　　If the printing workshop is not equipped with an industrial humidifier, the humidity will be very low, and static electricity will easily occur, which will have a great impact on the normal printing work:

　　1. The charged surface of the paper will cause the ink to transfer during printing, and there will be obvious "flowers and dots".

　　2. The charged ink will cause "static ink spots" or "ink whiskers" during printing.

　　3. The paper attracts and sticks to each other, wastes resources during printing, and is prone to printing defective products.

　　4. There will be a little hidden danger in electrostatic accumulation.

Read recommendations:

H01 table fan Heater Fan

J15 Air Humidifier

How to use an aromatherapy machine?

mini humidifier Vendor

desk fan Processor